IEI Technology iSignager-1000-Q354, Руководство пользователя

Страница: 151 / 189

iSignager-1000-Q354 Digital Signage Player
Page 137
Figure 8-17: SATA Cable Retention Screws
Step 7:
Remove the ODD from the ODD bracket by removing the four retention screws
on both sides of the ODD (
Figure 8-18
).
Step 0:
Figure 8-18: ODD Retention Screws
8.4.6.2 ODD Installation
To install the new ODD, please follow the steps below.
Step 1:
Attach the new ODD to the ODD bracket. Align the four retention screw holes in
both side of ODD with the retention screw holes on the side of the ODD bracket.
Insert the four previously removed retention screws into the bracket on both
sides of the ODD (
Figure 8-18
).
Step 2:
Attach the SATA cable to the ODD by aligning the two retention screw holes in
the SATA cable with the retention screw holes on the rear of the ODD. Insert two
retention screws into the SATA cable (
Figure 8-17
).