IEI Technology IMBA-XQ354S Скачать руководство пользователя страница 69

Страница: 69 / 181

IMBA-XQ354S Motherboard

Page 53

4.3 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

IMBA-XQ354S and other electronic components attached to the

system may be incurred. Running a CPU without a cooling kit may also

result in injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the

IMBA-XQ354S. If one of these component is not installed the IMBA-XQ354S cannot run.

4.3.1 Socket LGA775 CPU Installation

NOTE:

To enable Hyper-Threading Technology, the CPU, chipset and

operating system must all support Hyper-Threading Technology.

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

The LGA775 socket is shown in

Figure 4-1

Содержание IMBA-XQ354S






















































































































































































Результаты поиска

Содержание IMBA-XQ354S

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IMBA-XQ354S, Руководство пользователя

Результаты поиска

Содержание IMBA-XQ354S

Отзывы:

Бренды по названию

Популярные бренды