IEI Technology IMBA-XQ354S Скачать руководство пользователя страница 130

Страница: 130 / 181

IMBA-XQ354S Motherboard

Page 114

Enabled

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [Off]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified

during boot up.

Off D

EFAULT

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

Boot From LAN Support (82573L) [Disabled]

The

BOOT From LAN Support

allows the system to be booted remotely over a network

through LAN1.

Disabled D

EFAULT

Cannot be booted remotely through this port

Enabled

Can be booted remotely through this port

Содержание IMBA-XQ354S






















































































































































































Результаты поиска

Содержание IMBA-XQ354S

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IMBA-XQ354S, Руководство пользователя

Результаты поиска

Содержание IMBA-XQ354S

Отзывы:

Бренды по названию

Популярные бренды