IEI Technology IMBA-C2460, Руководство пользователя

Страница: 80 / 155

IMBA-C2460 ATX Motherboard
Page 66
4.5 DIMM Installation
To install a DIMM, please follow the steps below and refer to Figure 4-6 .
Figure 4-6: DIMM Installation
Step 1: Open the DIMM socket handles . Open the two handles outwards as far as
they can. See Figure 4-6 .
Step 2: Align the DIMM with the socket . Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-6 .
Step 3: Insert the DIMM . Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-6 .
Step 4: Removing a DIMM . To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket. Step 0:
CAUTION:
For quad channel configuration, install four identical memory modules
that feature the same capacity, timings, voltage, number of ranks and
the same brand.