IEI Technology IMBA-9654 Скачать руководство пользователя страница 52

Страница: 52 / 260

IMBA-9654 ATX Motherboard

Page 32

2.7.2.3 Super I/O Enhanced Hardware Monitor

The Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBAT

internally, and eight voltage monitor inputs. These hardware parameters are reported in

the BIOS and can be read from the BIOS Hardware Health Configuration menu.

2.7.2.4 Super I/O Fan Speed Controller

The Super I/O fan speed controller enables the system to monitor the speed of the fan.

One of the pins on the fan connector is reserved for fan speed detection and interfaced to

the fan speed controller on the Super I/O. The fan speed is then reported in the BIOS.

2.7.2.5 Super I/O Keyboard Controller

The Super I/O keyboard controller can execute the 8042 instruction set. Some of the

keyboard controller features are listed below:

The 8042 instruction is compatible with a PS/2 keyboard and PS/2 mouse

Gate A20 and Keyboard reset output

Supports multiple keyboard power on events

Supports mouse double-click and/or mouse move power on events

2.7.3 Serial Port Chipset

The IMBA-9654 has a Fintek F81216DG chipset onboard enables the addition of four

additional UART serial ports (COM3, COM4, COM5 and COM6). UART includes 16-byte

send/receive FIFO. The Fintek serial port chipset is interfaced to the southbridge chipset

through the LPC bus. Some of the features of the Fintek chipset are listed below:

Supports LPC interface

Totally provides 4 UART (16550 asynchronous) ports

3 x Pure UART

1 x UART+IR

One Watch dog timer with WDTOUT# signal

One Frequency input 24/48MHz

Содержание IMBA-9654





































































































































































































































































Результаты поиска

Содержание IMBA-9654

Отзывы:

IEI Technology IMBA-9654, Руководство пользователя, Страница: 52 / 260

Результаты поиска

Содержание IMBA-9654

Отзывы: