IEI Technology IMBA-9654 Скачать руководство пользователя страница 158

Страница: 158 / 260

IMBA-9654 ATX Motherboard

Page 138

Restore on AC Power Loss [Power Off]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system returns

to if there is a sudden loss of power to the system.

Power Off

(Default)

The system remains turned off

Power On

The system turns on

Last State

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume on Ring [Disabled]

Use the

Resume on Ring

BIOS option to enable activity on the RI (ring in) modem line to

rouse the system from a suspend or standby state. That is, the system will be roused by

an incoming call on a modem.

Disabled

(Default)

Wake event not generated by an incoming call

Enabled

Wake event generated by an incoming call

Resume on PME# [Disabled]

Use the

Resume on PME#

BIOS option to enable activity on the PCI PME (power

management event) controller to rouse the system from a suspend or standby state.

Disabled

(Default)

Wake event not generated by PCI PME controller

activity

Enabled

Wake event generated by PCI PME controller activity

Resume On RTC Alarm [Disabled]

Use the

Resume On RTC Alarm

to specify when the computer is roused from a

suspended state.

Содержание IMBA-9654





































































































































































































































































Результаты поиска

Содержание IMBA-9654

Отзывы:

IEI Technology IMBA-9654, Руководство пользователя, Страница: 158 / 260

Результаты поиска

Содержание IMBA-9654

Отзывы: