IEI Technology IMBA-9654 Скачать руководство пользователя страница 166

Страница: 166 / 260

IMBA-9654 ATX Motherboard

Page 146

Disabled

USB 2.0 controller disabled

Enabled D

EFAULT

USB 2.0 controller enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [HiSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed

The controller is capable of operating at 12Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480Mb/s

6.3.10.1 USB Mass Storage Device Configuration

Note:

This option is only available if a USB drive is inserted into the USB port.

Содержание IMBA-9654





































































































































































































































































Результаты поиска

Содержание IMBA-9654

Отзывы:

IEI Technology IMBA-9654, Руководство пользователя, Страница: 166 / 260

Результаты поиска

Содержание IMBA-9654

Отзывы: