IEI Technology IMB-9452 Скачать руководство пользователя страница 154

Страница: 154 / 188

IMB-9452 Motherboard

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product and

is subject to change without prior notice. Visit the IEI website or contact

technical support for the latest updates.

The IMB-9452 motherboard has the following software drivers:

Intel Chipset Driver Installation

VGA Utilities Driver

LAN Driver (for GbE LAN) Installation

RealTek Audio Driver (ALC883) Installation

SATA Driver Installation

All drivers can be found on the CD that came with the motherboard. To install the drivers

please follow the instructions in the sections below.

6.2 Chipset Driver Installation

To install the chipset driver, please follow the steps below:

Step 1:

Insert the CD into the system that contains the IMB-9452 board. Open the

1-INF

directory and locate the icon for the

infinst_autol.exe

installation file. Once

located, use the mouse to double click the icon.

Step 2:

The “InstallShield Wizard Preparation Screen” in

Figure 6-1

appears.

Page 154

IEI® Technology, Corp

Содержание IMB-9452





























































































































































































Результаты поиска

Содержание IMB-9452

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IMB-9452, Руководство пользователя

Результаты поиска

Содержание IMB-9452

Отзывы:

Бренды по названию

Популярные бренды