IEI Technology ICEROCK3-T10, Руководство пользователя

Страница: 41 / 129

ICEROCK3-T10 Tablet PC
Page 29
Figure 3-21: Barcode Information Display Area
3.7 Using GPS Evaluation Software
To evaluate the GPS function on the ICEROCK3-T10 models with GPS module, please
follow the instruction below.
Step 1:
The GPS function is enabled by default in the BIOS menu. If the GPS function is
disabled, please go to
Chipset

PCH-IO Configuration
BIOS menu to enable
it (refer to
Section 5.4.1
).
Step 2:
Install the u-center GPS evaluation software from the driver CD. Double click the
u-center setup file in the “GPS Module” folder as shown in
Figure 3-22
.
NOTE:
The u-center software installation requires network connection. Please
connect the ICEROCK3-T10 to the Internet before installation.