IEI Technology IAS0-W10B-N6210, Руководство пользователя

Страница: 20 / 55

IASO-W10B-N6210 Medical Panel PC
Page 12
2.1 Unpacking
To unpack the medical panel PC, follow the steps below:
WARNING / AVERTISSEMENT
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the medical panel PC has been
properly installed. This ensures the screen is protected during the
installation process.
L'écran LCD avant a un couvercle en plastique de protection collé à l'écran.
Retirez le couvercle en plastique uniquement une fois que le Panel PC
médical a été correctement installé. Cela garantit que l'écran est protégé
pendant le processus d'installation.
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the panel PC out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover off the medical panel PC.
Step 7: Make sure all the components listed in the packing list are present. Step 0: