IEI Technology IAS0-W10B-N6210, Руководство пользователя, Страница: 26 / 55

IASO-W10B-N6210 Medical Panel PC
Page 18
3.3 Installation Precautions
When installing the medical panel PC, please follow the precautions listed below:
 Manufacturer authorization : Do not modify this equipment without
authorization of manufacturer.
 Certified Engineers : Only certified engineers should install and modify the
hardware settings.
 Power turned off : When installing the medical panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.
 Anti-static Discharge : If a user open the rear panel of the medical panel PC,
to plug in added peripheral devices, ground themselves first and wear an
anti-static wristband.
 AC power plug : AC plug is used as a means and device to be separated from
the mains, and must be installed in a location where it can be easily
unplugged
WARNING / AVERTISSEMENT
DO NOT power up the IASO-W10B-N6210 while the front panel is facing
down on a sheet of conductive foam. Doing so may cause the touch
panel to malfunction due to the large surface area of contact between the
conductive form and the touch panel.
NE mettez PAS le IASO-W10B-N6210 sous tension lorsque le panneau
avant est orienté vers le bas sur une feuille de mousse conductrice. Cela
pourrait entraîner un dysfonctionnement de l'écran tactile en raison de la
grande surface de contact entre la forme conductrice et l'écran tactile.