IEI Technology eNOVA-945GSE, Руководство пользователя

Страница: 89 / 211

eNOVA-945GSE Motherboard
Page 73
Jumper Settings: See
8
Table 5-3
Jumper Location: See
8
Figure 5-6
If the eNOVA-945GSE fails to boot due to improper BIOS settings, the clear CMOS
jumper clears the CMOS data and resets the system BIOS information. To do this, use the
jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to
pins 1 and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
ƒ
Enter the correct CMOS setting
ƒ
Load Optimal Defaults
ƒ
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
8
Table 5-3 .
Pin Setting Description
1-2 Keep CMOS Setup
2-3 Clear CMOS Setup
Table 5-3: Clear CMOS Jumper Settings
5.9.3 CF Card Setup
Jumper Label: J_CF1
Jumper Type:
2-pin header
Jumper Settings: See Table 5-4
Jumper Location: See Figure 5-6
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 5-4 .