IEI Technology eNOVA-945GSE, Руководство пользователя

Страница: 81 / 211

eNOVA-945GSE Motherboard
Page 65
o
When working with the eNOVA-945GSE, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the eNOVA-945GSE DO NOT:
ƒ
DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.
ƒ
DO NOT use the product before verifying all the cables and power connectors
are properly connected.
ƒ
DO NOT allow screws to come in contact with the PCB circuit, connector pins,
or its components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the eNOVA-945GSE is properly installed.
ƒ
All the items in the packing list are present
ƒ
A compatible memory module is properly inserted into the slot
ƒ
The CF Type I or CF Type II card is properly installed into the CF socket
ƒ
The jumpers have been properly configured
ƒ
The eNOVA-945GSE is inserted into a chassis with adequate ventilation
ƒ
The correct power supply is being used
ƒ
The following devices are properly connected
o
IDE devices
o
SATA drives
o
Power supply
o
USB cable
o
Serial port cable
ƒ
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
Keyboard
o
Mouse
o
RS-232 serial communications device
o
USB devices