IEI Technology ECW-281BB6, Руководство пользователя

Страница: 6 / 167

ECW-281BB6 Embedded System
6. If the equipment should be left unused for an extended period of time,
disconnect it from the power source to avoid damage by transient
over-voltage.
7. If any of the following situations arises, get the equipment checked by service
personnel: 0.
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work properly, or the user cannot get it to work
according to the user manual.
o
The equipment has been dropped and damaged.
o
The equipment shows obvious signs of breakage.
WARNING!
Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards could void the authority
to operate the equipment.
MAINTENANCE AND CLEANING
Note the following precautions before beginning to clean the embedded system.
When cleaning any single part or component of the computer, please read and
understand the details below fully.
Never spray or squirt liquids directly onto any computer component. To clean
the device, please rub it with a piece of dry and soft cloth or a slightly
moistened cloth.
The interior of the embedded system does not require cleaning. Keep fluids
away from the embedded system and the interior of it.
Turn the system off before cleaning the embedded system.
Never drop any objects through the openings of the embedded system or get
the circuit board damp or wet.
Page 6