IEI Technology ECK-1000 Series, Руководство пользователя

Страница: 74 / 102

ECK-1000 Embedded System
Page 62
6.3 Component Replacement Procedure
The embedded system components listed below can all be replaced if they fail:
KINO motherboard
CPU cooling fan
CPU
Power module
Cooling fans
Memory module
6.3.1 DIMM Module Replacement
The installation procedure for the DIMM modules has already been fully described in
4.2.7 . Please refer to 4.2.7 to see how to install/replace the DIMM module.
6.3.2 Motherboard Replacement
KINO motherboard replacement includes the following two procedures:
Step 1: Removing the malfunctioning motherboard ( Section 4.2.3 ).
Step 2: Install the CPU on the new motherboard ( Section 4.2.4 ).
Step 3: Install the cooling kit on the new motherboard ( Section 4.2.5 ).
Step 4: Install the memory on the new motherboard ( Section Step 1: ).
Step 5: Installing the replacement motherboard ( Section 4.2.6 ). Step 0:
6.3.3 Power Supply Replacement
Power supply replacement includes the following two procedures.
6.3.3.1 Power Supply Removal
To remove the power supply, please follow the steps below.
Step 1: Turn off the system.