IEI Technology AFOLUX M Series, Руководство пользователя

Страница: 151 / 196

PICOe-6612 5.25” CPU Card
Page 131
7.3 15-inch to 19-inch Driver Installation and Configuration
7.3.1 RS-232 or USB Touch Screen
Before installing the driver, connect the Afolux monitor to the motherboard. The 15-inch to
19-inch Afolux monitors support touch screen modality through either RS-232 or USB
interface connection.
ƒ
RS-232 Interface:
If the touch screen interface connection is an RS-232
connection, connect the RS-232 connector on the single board computer to
the DB-9 connector on the bottom of the Afolux monitor.
ƒ
USB Interface:
If the touch screen interface connection is a USB connection,
connect the USB connector on the single board computer to the external USB
port connector on the bottom of the Afolux monitor.
7.3.2 15-inch to 19-inch Touch Panel Driver Installation
WARNING:
Before the touch screen driver is installed, make sure the system is
connected to the monitor with a USB cable or an RS-232 null cable.
Also, make sure the VGA connector on the system is connected to the
VGA connector on the bottom of the monitor.
To install the touch panel driver for the 15” to 19” Afolux please follow the instructions
below:
Step 1:
Connect the Afolux monitor to the single board computer. See above.
Step 2:
Insert the driver CD that came with the AFL series industrial monitor into the CD
drive.
Step 3:
Once the CD drive is installed, the screen in
965H965H
Figure 7-9
appears.