IEI Technology AFOLUX M Series, Руководство пользователя

Страница: 120 / 196

PICOe-6612 5.25” CPU Card
Page 100
5.6.1 Mounting Kits
925H925H
Table 5-4
lists the different mounting kits available from IEI.
AFL-07M AFL-08MH AFL-10M AFL-12M AFL-15M AFL-17M AFL-19M
Panel Mounting Kits AFLPK-08 AFLPK-12 AFLPK-15 AFLPK-17 AFLPK-19
Wall Mounting Kits AFLWK-12 AFLWK-19
Rack Mounting Kits AFLRK-07 AFLRK-08 AFLRK-10 AFLRK-12 AFLRK-15 AFLRK-17 N/A
LCD Monitor Stand STAND-A08 STAND-A12 STAND-A19/STAND-B19
Table 5-4: Mounting Kits
5.6.2 Panel Mounting
5.6.2.1 Standard Panel Mounting
The standard panel mounting procedure applies to the following AFL series industrial
monitors:
ƒ
AFL-07M
ƒ
AFL-08MH
ƒ
AFL-10M
ƒ
AFL-12M
To mount the AFL series industrial monitor into a panel, please follow the steps below.
Step 1:
Select the position on the panel to mount the monitor.
Step 2:
Cut out a section of the panel that corresponds to the rear panel dimensions of
the monitor. Take care that the panel section that is cut out is smaller than the
overall size of the metal frame that surrounds the monitor but just large enough
for the rear panel of the monitor to fit through (
926H926H
Figure 5-6
,
927H927H
Figure 5-7
and
928H928H
Figure 5-8
).