IEI Technology AFL2-15A-H61 series, Руководство пользователя, Страница: 56 / 213

AFL2-15A-H61
Page 39
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 3-23 .
Figure 3-23: DB-9 Serial Port Connector
Step 3: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
3.13.4.2 RJ-45 Serial Port Connection
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-15A-H61 panel PC.
Step 1: Locate the RJ-45 serial port . The location of the RJ-45 serial port is shown in
Chapter 1 .
Step 2: Connect the RJ-45 to COM port cable to the panel PC . Insert the RJ-45
connector end of cable into the RJ-45 serial port. See Figure 3-24 .
Step 3: Connect the serial device. Connect a serial device to the DB-9 connector end
of the cable. See Figure 3-24 .