IEI Technology AFL2-15A-H61 series Скачать руководство пользователя страница 134

Страница: 134 / 213

AFL2-15A-H61

Page 117

7.1 System Maintenance Introduction

If the components of the AFL2-15A-H61 fail they must be replaced. Components that can

be replaced include:

SO-DIMM

module

WLAN

module

Please contact the system reseller or vendor to purchase the replacement parts. Back

cover removal instructions for the AFL2-15A-H61 are described below.

7.2 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the

AFL2-15A-H61 may result in permanent damage to the AFL2-15A-H61

and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the AFL2-15A-H61. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the AFL2-15A-H61 is accessed internally, or any other

electrical component is handled, the following anti-static precautions are strictly adhered

to.

Wear an anti-static wristband

: - Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: - Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: - When configuring the AFL2-15A-H61, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

AFL2-15A-H61.

Only handle the edges of the PCB

: - When handling the PCB, hold the PCB

by the edges.

Содержание AFL2-15A-H61 series






















































































































































































































Результаты поиска

Содержание AFL2-15A-H61 series

Отзывы:

IEI Technology AFL2-15A-H61 series, Руководство пользователя, Страница: 134 / 213

Результаты поиска

Содержание AFL2-15A-H61 series

Отзывы: