IEI Technology AFL-317AB(W)-945, Руководство пользователя

Страница: 68 / 168

AFOLUX AFL-317A Series Panel PC
Page 52
4.10 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFOLUX AFL-317A flat panel PC. The
selection is made through an AT/ATX switch on the aluminum chassis inside the plastic
back cover (
Figure 4-21
). To select AT mode or ATX mode, follow the steps below.
Step 1: Remove the plastic back cover
. To do this, remove the 12 retention screws
from the back cover (
Figure 4-20
).
WARNING!
Watch out for the two internal PIFA antennas when removing the back
cover.
There are three PIFA antennas preinstalled on the top of the internal
chassis (see
Figure 2-16
). To prevent these antennas from damage, be
very careful when lifting the back cover off the AFL-317A.
Figure 4-20: Back Cover Retention Screws
Step 2:
Locate the AT/ATX switch on the aluminum chassis (
Figure 4-21
).