iEi Integration Corp. POC-17i, Руководство пользователя

Страница: 60 / 129

POC-17i/19i Series
Page 46
Step 6:
Grasp the DDR memory module by the edges and carefully pull it out of the
socket.
Step 7:
Install the new DDR memory module by pushing it into the socket at an angle
(
Figure 4-3
).
Step 8:
Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR memory module down (
Figure 4-3
).
Step 9:
Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR memory module in the socket.
Figure 4-3: DDR SO-DIMM Module Installation
4.4.2 HDD Card Replacement
The POC-17i/19i Series is preinstalled with one HDD. To replace the HDD, follow the
instructions below.
Step 1:
Follow all anti-static procedures. See
Section 4.2
.
Step 2:
Turn off the power. See
Section 4.3
.
Step 3:
Remove the HDD cover by removing the HDD cover screw.