iEi Integration Corp. POC-17i Скачать руководство пользователя страница 120

Страница: 120 / 129

POC-17i/19i Series

Page 106

A.3 FCC Precautions

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device and its antenna(s) must not be co-located or operating in conjunction with any

other antenna or transmitter.

IMPORTANT NOTE:

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Содержание POC-17i


































































































































Результаты поиска

Содержание POC-17i

Отзывы:

Похожие инструкции для POC-17i

Бренды по названию

Популярные бренды

iEi Integration Corp. POC-17i, Руководство пользователя

Результаты поиска

Содержание POC-17i

Отзывы:

Похожие инструкции для POC-17i

Бренды по названию

Популярные бренды