6
vibration from mechanical devices, etc.
⑥
The installation method and installation type shall comply with the conditions of
use of the explosion-proof electric device.
⑦
Bolts, nuts, gold tools, etc. used for installation shall have sufficient mechanical
strength, and materials and surface treatment according to the characteristics of
the installation site shall be used.
⑧
Exposed charging parts should not occur.
2.4.2.2.3
The installation shall be suitable for the intended use of the place of use.
2.4.2.2.4
This product shall be installed so that the withdrawal line is separated at the
highest temperature when the target of measurement is high temperature, and
it cannot be directly contacted by the high temperature area, and the operator
shall be instructed and trained to ensure safe installation.
2.4.2.2.5
The operator shall be instructed and trained to ensure safe installation so that
excessive force is not applied to the connector on which this product is
withdrawn.
2.4.2.2.6
When transporting this product, do not over-impact the equipment and
components installed inside and outside, and provide the operator with
knowledge and training prior to installation to ensure safe installation.
2.4.2.2.7
During the installation process of this product, the power shall be turned off to
prevent safety accidents such as electric shock and other equipment
malfunctions, and the operator shall be instructed and trained before
installation to ensure safe installation.
2.4.2.2.8
Due to the nature of this product, the EARTH LINE is not configured separately,
so EARTH should be grounded using the terminal EarthBolt.(This product is
installed by attaching it to pipes with existing ground, so no internal/external
grounding is required.)
Be sure to contact the manufacturer for any questions regarding the installation
of this product.
2.5
Machine Operation and Precautions
2.5.1
Operating method
2.5.1.1
Check the connections and metal pipes of the cables installed on the product.
2.5.1.2
Apply power to installed products.
2.5.1.3
Verify normal operation.
2.5.2
Precautions for caution
2.5.2.1
Before using the product, be sure to read the user manual and use and install the
product in the prescribed manner.
2.5.2.2
This product shall be constructed by a qualified professional electric contractor.