I-Collect 2.0
General operation
I-Collect 2.0
Page 7 of 15
4
General operation
The I-Collects are delivered in the standard configuration with HID emulation, all other settings can only be made after
downloading the documentation and software.
Step 1: Power on the device
Step 2: To enable device to be Bluetooth Pairing mode as following way:
Press the key for 8 -10 seconds, then you could see the Green stay on and two blue light flash alternately.
The Bluetooth
name of the device is “BarCode scanner HID”.
Open bluetooth settings on Android, iOS or Windows to get connecting with the device, when one blue light and green light
on and buzzer sounds means pairing successfully.
After then, open any text access tab, the data will be output as keyboard emulation
For the RFID Reader, when device power on, the reader will be on working automatically, and when slot the card, the card
UID will be displayed on any text access tab.
The internal storage is 2 Megabyte which can store up to 100000 barcodes and uids.
If you connected the device with your PC or smartphone , it should autoconnect again ,if both devices have bluetooth
enabled.
You can charge the device via micro USB.
With a full charged battery the device can be used 14000 times in total.
When the device is turned off and then turned back on, it connects to the device it was last connected to.
Mirco-USB charging
port
