iDTRONIC I-Collect 2.0, Руководство по эксплуатации

Страница: 10 / 15

Configuration via Software I-Collect 2.0
Page 10 of 15 I-Collect 2.0
5 Configuration via Software
5.1 Windows
The software for configuration can be downloaded on our website. You can configure the device, if you scan the QR-Code,
which is generated from the software, after you pressed create code.
Select the function, which you want to use, than select “create
code”.
Choose the function, which you want to use, than select “create
code”.
Select the output format
Select the block
Select start adress
How many bytes should be
output (max. 16)
Scan this code with the I-Collect 2.0, to
change the settings of the reader
Create the Code, for scanning
with the I-Collect 2.0
For further use
Input access Key.
Standard Key is : FFFFFFFFFFFF
Select Keytype (for more information
refer to mifare documents