IDTECK LX007, Руководство пользователя

Страница: 51 / 107

p.43 F1 SETUP MENU
ID+F/P(P/W)
In this mode, users can access the door by presenting their card or entering their ID
number and then verifying their identity by a fingerprint. For users who did not reg
ister their fingerprints, password verification is used instead of fingerprint verificati
on.
ID+P/W+F/P
In this mode, users can access the door by presenting their card or entering their ID
number and then verifying their identity by both a fingerprint and a password.
1.4 Reader #2 Mode
The READER#2 MODE setting can be configured in the same way as READER#1 MODE setti
ng in the previous section.
NOTE: READER#2 refers to the Exit Reader connected to the LX007.
ID ONLY
Select this mode if the Exit Reader is operating without using a password
ID+P/W
Select this mode if the Exit Reader is using password verification.
1.5 Reader #1 KEY Input
This setting allows you to decide whether to USE or NOT USE the keypad inputs for the Read
er#1.The default setting is NOT USE the keypad input. If you want to access the door by ent
ering the user ID by keypad, set this mode USE.