VP5300 User Manual
Page | 35
2.
The VP5300 is now fully configured to do PIN-based transactions (if the presented credit card
supports them). Verify that the VP5300’s front removal detection switch is firmly pressed down.
The pressure switch is located on the front bezel, right side, behind the rubber gasket. If the unit
is not mounted in a kiosk or other fixture, you can temporarily engage the pressure switch by
attaching a strip of metal to the right side of the flange as shown below (note the wing nuts):
3.
Next, return to the L100 or L80 and power-cycle the PIN pad. You have only 2 seconds to start
entering the special pairing command on the keypad. To get into the special menu, press:
SmartPIN L100
SmartPIN L80
•
Cancel
•
Clear
•
Enter
•
Blank
•
Clear
•
Enter
•
Cancel
•
5
•
Enter
•
0
•
5
•
Enter
