VP5300 User Manual
Page | 28
7.2.
L100 and L80 Diagnostic Messages
VP5300 units connected to L100 and L80 PIN Pads may display the following diagnostic messages.
Message ID
Display Message
Description
Message ID Display Message
Description
1
Tampered
Device is tampered.
2
Deactivated
Device is not activated.
3
Activated
Device is activated.
4
No Key Injected
DUKPT key (such as LCL-KEK, DEK,PEK) does not exist.
5
Welcome
All initialization finished.
6
Cert Failed
Certification self-check has failed.
7
FW/BL Failed
Firmware self-check has failed.
8
CLL2 Failed
Contactless kernel self-check has failed.
9
Keys Failed
Encryption key self-check has failed.
10
Whitelist Failed
White list data file self-check has failed.
11
Restricted
Check for a suspected attack.
12
TRANS
Suspended
If the device supports the “Remove detection” function, the device will support Dual
Control (2 passwords) to Enable / Disable the “Remove detection” function.
If there are three password entry errors in a row, the device will work in the
“Suspend” state in three minutes.
13
PWR Off in 5secs System is in low power; the device will shut down in five seconds.
14
No FW Detected
TM4 has no firmware, please load firmware.
15
Pls Upgrade FW
TM4 firmware is not the latest, please upgrade to the most recent firmware.
16
Loading Key
Load DEK to TM4 chip.
17
Tamper Triggered TM4 physical tamper is triggered.
