8A3xxxx 72QFN EVK User Manual
© 2019 Integrated Device Technology, Inc.
16
February 14, 2019
3.
How to Upload Firmware to the RAM
1.
Connect to the EVK board.
2.
Power up the board with no EEPROM present. This ensures the firmware is 4.0.2.7017, as displayed in the figure.
3.
The GUI will indicate that the firmware on the chip does not match the GUI firmware. Press “Close”.
4.
Open the “Firmware Utility” window by clicking on the button as follows.
5.
Update the Firmware first. Press “Update RAM to Current FW Only”.
6.
In the next window, press “Yes” and wait around 3-4 minutes.