REVISION C 09/29/14
5
82P33731/33831 EVALUATION BOARD
Figure 3. Starting up Timing Commander GUI
3. After selecting “New Settings File”, a device selection window will pop up. In the window, choose the intended device in
the list (82P33831 was selected in the following example). Click the button at the lower right corner of the window to
browse and select the correct personality file, then click OK.
Note
: Due to the hardware structure of the chip, two personality files will need to be used to configure and program
82P33x31 board: (1) IDT82P33x31_v1.0_TC_1.5.1.2.tcp; (2) IDT82P33x31_APLL3_v1.0_TC_v1.5.1.2.tcp. To begin
with, use the personality file (1). See
Figure 4
below.
Personality file (2) is used only for programming APLL3 and is deferred until Step 9 below.
