IDS X64, Быстрое руководство по программированию

Страница: 17 / 36

IDS X64 Quick Programming Guide 700-398-03A Issued August 2010
17
LOCATION 242 Keypad Zone Number (default = 0, i.e. Disabled)
[#] [INSTALLER CODE] [*] [2] [4] [2] [*] [KEYPAD NUMBER] [*] [ZONE NUMBER] [*]
Keypad number = 1 – 8
Start zone = 01 – 64
LOCATION 243 View Keypad ID
[#] [INSTALLER CODE] [*] [2] [4] [3] [*]
LOCATIONS 251 - 258 Keypad Options
[#] [INSTALLER CODE] [*] [LOCATION] [*] [BITMAP] [*]
Location = 251 – 258
LED On / Off Action
1
ON
The keypad will timeout back to its default partition after it has been used to
view another partition
OFF
The keypad will not timeout and will continue to show current partition
information
2
ON Keypad sleep mode enabled
OFF Keypad sleep mode disabled
3
ON Enable Global Keypad Status
OFF Disable Global Keypad Status
Default values are shaded
LOCATION 300 Global Reporting Code 1
[#] [INSTALLER CODE] [*] [3] [0] [0] [*] [SUB-LOCATION] [*] [REPORTING CODE] [*]
Sub-location = 1 – 8
Sub-location 1 is AC Fail
Sub-location 2 is AC Restore
Sub-location 3 is Low Battery Monitor Fail
Sub-location 4 is Low Battery Monitor Restore
Sub-location 5 is Auto Test
Sub-location 6 is Download
Sub-location 7 is Siren Monitor Fail
Sub-location 8 is Aux 12V Monitor Fail
Reporting code = 01 – FF, with 00 to disable
LOCATION 301 Global Reporting Code 2
[#] [INSTALLER CODE] [*] [3] [0] [1] [*] [SUB-LOCATION] [*] [REPORTING CODE] [*]
Sub-location = 1 – 8
Sub-location 1 is Reserved
Sub-location 2 is Bus-wired Peripheral Tamper