IDS X Series, Руководство пользователя, Страница: 18 / 32

Section: 8
IDS X-series LCD Keypad User Manual 700-411-01D Issued August 2010
18
Table 2: User Code Properties
Option Property
1 Master User
2 Duress Code
3 Arm to Disarm Code [Maid‟s Code]
4 Arm Code
5 Disarm Code
6
Global Arm /Disarm
7 Programmable Output Code
Explanation of User Code Properties
8.3.7.1 Master User
When assigned to a user, this property allows the user to act as a Master User.
8.3.7.2 Duress Code

This is a special 4 (default) or 6-digit user code (check the code length with your installer) and
should only be used in the unique situation where an intruder forces one to disarm the system
"under duress".

When the [DURESS CODE] is entered, the control panel disarms normally - however a DURESS
REPORTING CODE is transmitted to the monitoring company to inform them that you have been
forced to disarm the control panel by an intruder.

It is advisable to choose a code that can be easily remembered by all family (or staff) members.
8.3.7.3 Maid‟s Code
This code can be used to limit access to the premises. A maid‟s code will only disarm the system if the
same code was used for arming. If armed with a code other than this code, the system will view an
attempt to disarm using a maid‟s code as an invalid entry. Any valid user code will disarm the system if it
has been armed with a maid‟s code.
8.3.7.4 Arm
This code will arm the partitions assigned to the user depending on their status. If all partitions are
disarmed, entering a group code will arm all of the assigned partitions. In a case where some partitions
are armed and others disarmed, entering this group code at the keypad of the disarmed partition will arm
the disarmed partitions only.
8.3.7.5 Disarm
This code will disarm the partitions assigned to the user depending on their status. If all partitions are
armed, entering a group code will disarm all of the assigned partitions. In a case where some partitions