IDS VX PRO Series Скачать руководство пользователя страница 63

Страница: 63 / 66

Product code :

868-08-002

Helpdesk :

+27 (0) 87 159 7341

Intercom door station 2 channel

Appearance

1. Microphone 2. Indicator 3. Camera 4. Loudspeaker

5. Bu�on 6. Card reading area 7. IR light

8. Micro SD card slot(Reserved) & debugging port 9. Network interface

10. Terminals

Note: The debugging port is used for debugging only.

Note: The dimension of the moun�ng plate is 174mm x 83.66mm x 18mm

Note: Video intercom villa door sta�on supports surface moun�ng

Terminal and wiring

NC: Door lock relay output (NC) 485-:RS-485 Interface (Reserved)

NO: Door lock relay output (NO) 485+: RS-485 Interface (Reserved)

COM: Common interface 12 VDC IN: Power supply input

AIN1: For the access of door contact GND: Grounding

AIN3: For the access of exit bu

on LAN: Network interface

AIN2&AIN4: Reserved

Installation accessory

1. Moun�ng template 2.Moun

ng plate

Installation

Configura

on via web

You are required to ac

vate the device ﬁrst by se

tti

ngs a strong

password before you can use the device.

Default parameters of door sta

on are as follows:

-Default IP Address: 192.0.0.65.

-Default Port No.:8000.

-Default User Name: admin

1. Power on the device, and connect the device to the network.

2. Enter the IP address into the address bar of the web browser

and click Enter to enter the ac

on page.

Note: The computer and the device should belongs to the same subnet.

3. Create and enter a password into the password ﬁeld.

4. Conﬁrm the password.

5. Click OK to ac

vate the device.

Note: When the device is not ac�vated, the basic opera�on and remote

conﬁgura�on of device cannot be performed.

Surface moun�ng with protec�ve shield

Indicator descrip�on: Unlock: Green Call: Orange Communicate: White

Before you start

-Make sure all related equipment are powered oﬀ during the installa�on.

-Tools that you need to prepare for installa�on: Drill(ø2.846) and gradienter

-Purchase the protec

ve shield before installa

on.

1. S

ck the moun

ng template on the wall. Drill screw holes according to

the moun

ng template. Remove the template from the wall.

2. Secure the moun

ng plate on the wall with 4 supplied screws according

to the screw holes.

3. Secure the device on the moun

ng plate with 4 supplied set screws.

4. Fix the cover onto the device with the screw.

1. S

ck the moun

ng template on the wall. Drill screw holes according to

the moun

ng template. Remove the template from the wall.

2. Align the protec

ve shield with moun

ng template.

3. Secure the moun

ng plate on the wall with 4 supplied screws according

to the screw holes.

4. Secure the device on the moun

ng plate with 4 supplied set screws.

5. Fix the cover onto the device with the screw.

Surface moun�ng with protec�ve shield

1. S

ck the moun

ng template on the wall. Drill the hole according to the

moun

ng template.

Remove the template from the wall. The suggested size of hole is

175 mm × 84 mm × 19 mm.

2. Install the gang box into the hole with 4 screws.

3. Align the protec

ve shield with gang box.

4. Insert the device to the gang box. Secure the device with 4 supplied

screws.

5. Fix the cover onto the device with the screw

Surface moun�ng without protec�ve shield

1. S

ck the moun

ng template on the wall. Drill the hole according to the

moun

ng template.

Remove the template from the wall. The suggested size of hole is

175 mm × 84 mm × 19 mm.

2. Install the gang box into the hole with 4 screws.

3. Insert the device to the gang box. Secure the device with 4 supplied

screws.

4. Fix the cover onto the device with the screw

Surface moun�ng without protec�ve shield

1. Ac�va�on device via web

1. In the browser address bar, enter the IP address of the device, and

press the Enter key to enter the login page.

2. Enter the user name and password and click Login.

1. Click Se

ngs -> Intercom -> Press Bu

on to Call to enter the se

tti

ngs page.

2. Set the parameters.

- Edit call No. for every bu

on.

- Check Call Management Center to set the bu

on calling center.

Note: If you check Call Management Center and set the call No. as well, call management

center has higher privilege than call No.

3. Press bu

on to call indoor sta

on.

1. Click Se

tti

ngs -> Access Control and Elevator Control to enter the

tti

ngs page.

2. Click Issue Card. Present the card on the card reading area.

3. When issuing ﬁnished, the windows pop up on the se

tti

ngs page.

Note:

Only Mifare card supported, and Mifare card with non-standard shape is recommended.

Up to 10000 cards can be issued and managed by V series door sta�on. A voice prompt

(No more cards can be issued.) can be heard when the issued card amount exceeds the

upper limit.

er issuing cards, you can unlock the door by presen

ng the issued cards.

Refers to Video Intercom Villa Door Sta

on User Manual (scan the QR code) for details.

2. Access to the device by web browsers

3. Communicate with indoor sta�on

4. Issue card

5. Unlock door

VX PRO

Содержание VX PRO Series



































































Результаты поиска

Содержание VX PRO Series

Отзывы:

Похожие инструкции для VX PRO Series

Бренды по названию

Популярные бренды

IDS VX PRO Series, Руководство пользователя

Результаты поиска

Содержание VX PRO Series

Отзывы:

Похожие инструкции для VX PRO Series

Бренды по названию

Популярные бренды