IDS VX PRO Series, Руководство пользователя

Страница: 48 / 66

Diagram References
Specification
Description
4
5
Installation
Detection range
Anti-masking alarm
3
1 2
Enrollment
Masked:
PIR Triggered: (top)
Alarm: MW Triggered: (bo � om)
Fault:
+
Detec � on Method Passive Infrared,Microwave
Detec � on range 15m
Detection angle 90° @ 180° adjustable
Detec � on zone 92
Detectable speed 0.3
〜
2m/s
Sensi � vity Auto,Low
White light filter 10000lux
Pet immunity 30Kg
Microwave frequency 24GHz(24.15 〜 24.25GHz)
Digital temperature compensa�on Tri-Signal logic
An � -masking Support
Support
Pattern mask included
Digital processing Tri-Signal logic
Sealed op�cs Support
Tamper protec�on Front,Rear
Environment temperature indicator Support
Signal strength indicator Support
An � -sway analytics Support
Power switch Power up enrolling
LED Indicator
Green(Top PIR), Red(Microwave),
Orange(Bottom PIR), Green+Orange(Mask),
Blue(Alarm)
Transmission technology Tri-X wireless
Transmission method Two-Way RF wireless
Transmission frequency 868MHz
Transmission security AES-128 Encryption
RF Range 1.6Km
Frequency hopping Support
Enrolling method Power up, remote ID,QR code
Standard battery life
5 years in work status (being triggered 20 � mes
per day)
Power supply Battery powered
Battery type CR123A × 5
Typical voltage 3V
Low voltage value 2.45±0.1V
Voltage range Fully charged(new) to 2.45±0.1V(battery)
Operating temperature -25 °C to 60 °C (-13 °F to 140 °F)
Storage temperature -25 °C to 60 °C (-13 °F to 140 °F)
Opera � ng humidity 10% to 90%
IP Rate IP65
Dimension(WxHxD) 75mm × 202mm × 73mm
Weight 600g
Mounting height 0.8 to 1.2m
Moun � ng method Wall
Adaptable coverage
Note: This product can only power the camera module as its accessory.
EN 50131-2-4:2020
EN 50131-5-3:2017
EN 50131-1+A1+A2+A3
EC IV ， SG 2
Cer �fi ed by KIWA
1. LED Indicator
2. Ver�cal pole mount 3. Screw hole
4. Top/bo�om cover 5. Front panel
6. PCB
a. PIR Module (Top) b. PIR Module (Bo�om)
c. Tamper switch d. Power switch e. Microwave module
f. Antenna g. PIR Angle
7. Rear panel
I. Enrollment succeeded.
Note: The front panel should be installed before
powering on successfully.
II. Check signal strength.
I. Detector range
1. PIR Angle se�ngs 2. PIR Distance se�ngs
II. Masking seal
Product code : 868-05-050
Helpdesk : +27 (0) 87 159 7341
Wireless outdoor tri-tech anti-masking detector
VX PRO VX PRO