
© 2009 IDS Imaging Development Systems GmbH
199
9 Specifications
Digital Output Wiring (Flash)
Digital output specifications
Max. signal
level
Low
Min. signal
level
High
Max. signal level
High
Max. output current
0.4 V
2.4 V
3.0 V or 3.3 V
*1)
4 mA
*1) This voltage depends on the supply voltage required for the sensor used (see tab le b elow)
The digital output of the
USB uEye
LE
is not potential-free and has no protective circuits.
Internal supply voltage by sensor type
3.0 V
3.3 V
164xLE
155xLE
148xLE
122xLE
154xLE
146xLE
Digital output wiring
Figure 184: Digital output wiring
General Purpose I/O Wiring
GPIO specifications
The two GPIOs (General Purpose I/O) can be used as inputs or outputs. This selection is made by
software using the corresponding SDK API functions. Please observe the following criteria:
·
Input:
3.3 V LVTTL, max. 3.3 V input voltage
·
Output:
3.3 V LVTTL, max. 4 mA
Max. signal
level
Low
Min. signal level
High
Max. signal level
High
Max. output current
0.4 V
2.4 V
3.0 V or 3.3 V
*1)
4 mA
*1) This voltage depends on the supply voltage required for the sensor used (see tab le b elow)