IDS Ingegneria Dei Sistemi S.p.A.
N. doc.: MN/2009/056 - Rev. 1.1
RIS Hi-Mod / DUALF-400-900 - Installation Guide
and User Manual
23
/
44
Fig. 1.13 – Equipment provided for the two antennas configuration
1.2.1
Assemblage instructions
First you have to set the rudder in its two antennas setting. The rudder has two free
bars and four knobs (Fig. 1.2). The bigger ones must be screwed in vertically to
block the free bars in place while the little ones can be screwed in two different
position: if placed on the inside part of the frame you will get the mono or three
antenna configuration (Fig. 1.3); if placed on the external part of the frame you
will get the two or four antenna configuration (Fig. 1.14).
Fig. 1.14 – Two antennas rudder configuration
Rudder
Wheeled
frames
Antennas
Connection
Pipes
Non-
wheeled
frame
DAD unit &
Batteries
Battery &
LAN cables
Antenna
cables
