6
1-5) CASES IN WHICH THE MANUFACTURER IS NOT LIABLE
The manufacturer is not liable for damage caused by the following :
-
Improper use of the machine or use by untrained personal.
-
Use of non genuine spare parts.
-
Non-compliance with maintenance.
-
Unauthorized modifications or operation
-
Non-observance, in total or part, of the instruction manual
1-6) SAFETY
To guarantee a long pump life, it is forbidden to circulate liquids with sand or other solid particles that compromise the
efficient running of the valves, pistons and seals. Fit any other filters to the waterfeeding circuit.
Only environmentally friendly chemicais which are fully biodegradable should be used in the machine
Do not use paints, adds, solvents, oily or very dense materials.Never use the machine in or near any flammabie pro
-
ducts or environments (e.g. gas or petrol fumes).
Protect the machine from extreme cold and adverse weatherconditions.Avoid starting in extremely cold conditions as
damage may occurto the pump and motor The machine should only be used by an adult perator who has been suitably
trained. Never leave the machine unattended when It is switched on or if children are present.
Do not use the machine in the presence of unauthorized personnel or persons who are not wearing suitable protective
garments.
Although a suitable grip is provided with the lance, the water pressure at the start of the discharge from the nozzle
(opening of the trigger) produces a REACTIVE FORCE (recoil) which needs to be COUNTERBALANCED.
The necessary counterbalance force required is shown In the table below and is expressed in Newlons.
This equipment has been designed for use with the detergentrecommended by the manufacturer The
use of other deter-gents or chemical products other than those specified may af-fect the safety of the
equipment.
1-7) SYMBOLS
In this manual the symbols depicted describe important functions of the machine; for the installation; for the use and
disposal. For correct and safe use of the machine the operator must read carefully all parts of this manual lending spe-
cial attention to the
warning symbols and manufacturer’s plate.
PAY ATTENTION TO SAFETY IN THE WORKPLACE!
Follow the instructions displayed on the warning signs. Failure to do so may cause severe injury or
endanger personal safety. Ensure that the signs are present and legible.
If they are not, they should be fitted or replaced.
This manual must be read before using or carrying out maintenance or other operations on
the machine. Do not allow unauthorized personnel to use the machine
GB
Distributed by Australian Pump Industries (02) 8865 3500
