16
6-4) WORKING LIMITS
Prolonged inactivity (machine stopped) in temperatures less than 5°C (5 degrees
centigrade) can cause damage or breakage to the pump, hoses, and to the parts in general. It is therefore advisable to
completely empty the machine. Read the warning notice in section 5-2 of this manual and if more information is requi-
red contact the retailer or manufacturer.
6-5) POSITIONING OF THE OPERATOR AND DANGER AREAS
The machine is equipped with a 10 metre long High Pressure hose so the operator never loses sight of the machine and
the relevant electrical and hydraulic connections, he can
move around freely and wash within this area.
6-6) SAFETY FEATURES AND WARNING INDICATIONS
The pressure washer is equipped with the following safety features:
A- PROTECTIVE AMMETER: it is an integrated safety feature of the power switch that turns off the pressure cleaner
in case of electrical overload, automatically tripping the power
switch into the OFF position.
Whenever this safety feature is activated this sequence must be followed:
- remove the plug from the wall socket
- press the trigger on the pressure cleaner to release any residual pressure remaining
- wait for 10 minutes for the pressure washer to cool down
- disconnect the electric plug and verify that it complies with the instructions contained in
the paragraph “Connection and installation of the electricity supply,” checking the extension lead used.
- reconnect the electric plug and repeat the procedure for start up descibed in the aragragh, “initial activity and start-up”
GB
WARNING:
The pressure washer has an exhaust for the evacuation of exhaust fumes that is considered a DANGER AREA because
it emits hot fumes from the combustion of diesel. DO NOT TOUCH the exhaust because it can be very hot and it is
EXPRESSLY FORBIDDEN to cover the exhaust with objects, clothes, or any other items. Do not expose the face or
any other part of the body to the exhaust fumes.
WARNING:
The pressure washer produces a jet of high pressure water from the nozzle at the end of the lance that is considered a
DANGER AREA because it can produce serious damage due to the high force of the water.
IT IS EXPRESSLY FORBIDDEN
to direct the jet against people or parts of the body, animals or fragile objects. The failure to
observe this warning can cause serious injury or damage like cuts and lacerations.
The manufacturer can not be held liable for any damage, accidents or injuries to people or
animals due to the disregard of this prohibition
Distributed by Australian Pump Industries (02) 8865 3500
NEVER direct spray jet at any surface that may contain asbestos material.
