idp SMART-70, Руководство пользователя

Страница: 22 / 48

Figure 11 Front side of Laminator
Figure 12 Rear side of Laminator
① Kensington lock
Kensington lock is usable
② Communication port
To communicate between SMART-70 modules,
please connect to an adjacent module.
③ Serial communication port
This port is to communicate with external
device except SMART-70 modules.
④ USB device port
When Laminator is used without the Printer,
this port is to communicate with PC.
⑤ Power port
Please connect the 24V DC power adaptor
provided with Laminator.
⑥ Power switch
Turn On/Off
1
2
3
5
7
4
6
1
2 3 2
4 5 6
① Control panel LCD
The status of Laminator is displayed.
② Control panel buttons
Buttons are used to adjust configuration and
check status.
③ Physical lock
Physical lock is to lock Laminator and film
cartridge.
④ Film cartridge lock lever
To pull out film cartridge, please turn lever to
the right 90 degrees.
⑤ Film cartridge
Laminating film for 500 cards is loaded into
cartridge. Ribbon cartridge in Printer can’t be
used for Laminator.
⑥ Indicator LED
The status of Laminator is displayed by the
color.
⑦ Card gate
Card gate is to convey cards from module to
module.
22