The menus of the control panel of Printer are as below table.
Menu
Submenu
Description
>System Config.
>>Combination
To set module combination. Refer to the chapter
2.1.10 for modules combination setting.
>>Operation Mode
To set Printer as a Master device. Default is Master.
>>Insert Dir
To set the direction of Card In. Default is the left.
>>Eject Dir
To set the direction of Card Out. Default is the right.
>>Auto Card In
To set the automatic card feeding when the card is
detected at the direction of Card In. Default is OFF.
>>UserCounterClear
To reset user issue count.
>Network Config.
>>DHCP
To set whether to use DHCP function. Default is On.
>>IP Address
IP address to be used when DHCP is OFF.
>>Network Mask
Network Mask to be used when DHCP is OFF.
>>Gateway
Gateway address to be used when DHCP is OFF.
>Print Config.
>>XStartPosition
To set the start position of the printing on the card’s
X-axis (shorter side).
>>YStartPosition
To set the start position of the printing on the card’s
Y-axis (longer side).
>>YEndPosition
To set the end position of the printing on the card’s
Y-axis.
>>YScale
To set the length of printed image on the card’s Y-
axis.
>>TotalDensity
To set the total printing density.
>>ColorDensity
To set the color density
>>BlackDensity
To set the resin black density.
>>OverlayDensity
To set overlay density.
18
Содержание SMART-70
Страница 1: ...2015 05 SMART 70 User Manual...
