53
③
Print:
Print test with CSD file which is designed by Smart ID program.
④
Batch Start:
Repeat selected encoding test by “
⑤
Encoding”
⑤
Encoding:
Encode Magnetic Stripe, Contact Card, Contactless Card
⑥
Printer Status:
Check printer status.
⑦
Message:
Description of status by log.
(2) Select printer and control
When you execute CardPrinterTest, it will search connected printers by USB and Network
automatically and SMART-31 printer connected to USB has higher priority. Other printers could be
selected by pull-down menu. You can test all function with connected printer.
. Control is consisted by SBS(Step by Step), Move, Rotate, Etc. section and you can control
printer by each step.
SBS
SBS is to operate SMART-31 printer in SBS(Step-By-Step) mode which you can control
the printer using commands. In SBS mode, after printing data transmission, printing a card
will be run onl
y by clicking “DoPrint”. It is the main difference between NORMAL mode and
SBS mode. When you click “Start”, SMART-31 is operated in SBS mode, and existing
spooled data will be eliminated. To exit SBS mode, click “Stop”.
Card
Card is to bring a card int
o printer and eject a card. “In” is to move a card from input
hopper to printer and “Out” is to move a card from printer to output hopper. In case the
flipper is installed, “Back” ejects a card to the back side.
Move
Move is to move a card to specific po
sition in the inside of printer. “Print” is to move a card
to the printing position, and “Mag.” is to the magnetic encoding position, and “IC” is to the
contact smartcard encoding position, and “RF” is to the contactless smartcard encoding
position. “To Rotator” is to move a card from printer to flipper and “From Rotator” is to
move a card from flipper to printer. “from In” is to move a card from the card in sensor to
