iDOT V Series, Руководство пользователя

Страница: 9 / 28

V-Series User’s Handbook
Completing V-Series system setup
Setting Up Your V-Series System 9
Follow these steps to finish setting up your computer:
1.
Make sure all power cables are plugged into power outlets
(computer, monitor, printer, modem, etc.).
Notes
In order for the computer to be properly grounded, its
power cord must be plugged into a grounded outlet, power
strip, surge suppressor, or UPS (uninterruptible power
supply).
Although not a requirement, iDOT.com recommends that
you plug your equipment into a surge protector or UPS to
protect your system from electrical surges. Damage
caused by surges or electrical line problems are not
covered by your iDOT.com warranty.
2.
If your system includes a printer, turn on the printer.
3. Turn on the monitor.
4. If your system includes speakers, turn on the speakers.
(The speaker power switch is either on the front or the back of
one of the speakers, depending on the type of speakers you have.)
5. Turn on the computer as follows:
a. Make sure no diskettes or CDs are in the computer.
b.
Turn on the system’s master power switch on the back of the
computer (if it is not already on).
To turn the master
power switch ON,
press down the side
with the — .