IDK NJR-R04HD, Руководство пользователя

Страница: 47 / 94

NJR-T04HD / NJR-R04HD User’s Guide
47
10.2.3 Aspect ratio
You can set the aspect ratio for each video input.
If you select “AUTO-1” or “AUTO-2,” the aspect ratio is restored automatically to the original ratio according to
the input signal.
“AUTO-1” and “AUTO-2” work differently only when a letter box signal is presented to the input. “AUTO-1”
processes them as a 16:9 or 14:9 video signal, while “AUTO-2” sets them as 4:3.
Normally, no problem occurs if you set the aspect ratio to “AUTO-1”, but some DVD players and other devices
display subtitles or setup menus in the un-displayed area. In such case, set the aspect to “AUTO-2” to display
the entire area of the video signal.
Setting options of “16:9”, “14:9”, “4:3”, ”16:9 / 14:9 LETTER BOX”, and ”4:3 / 14:9 SIDE PANEL” are
accessible only when a TV signal is input. When PC signal is input, the aspect ratio will be restored
automatically according to the aspect ratio of the input signal regardless of the settings:
“AUTO-1”, ”AUTO-2”, ”16:9”, ”14:9”, ”4:3”, “16:9/14:9 LETTER BOX”, and ”4:3/14:9 SIDE PANEL”.
“FULL”: video signal is displayed always in full screen mode.
“THROUGH”: video signal is displayed always in pixel 1:1.
If “ 10.5.7 Video type ” is set to “All Inputs”, each input video is converted to 1920×1080 so that output aspect
ratio is 16:9.
Setting for
For each HDMI input connector, each input signal
If “ 10.11.1 Devices to be connected ” is set to “NJR-T01UHD or NJR-R01UHD is included” or “ 10.5.7
Video type ” is set to “All Inputs”, @SAP communication command cannot be used.
Setting value
AUTO-1 [Default] 14:9 LETTER BOX
AUTO-2 4:3 SIDE PANEL
4:3 14:9 SIDE PANEL
16:9 FULL
14:9 THROUGH
16:9 LETTER BOX
Communication command
@SAP Setting aspect ratio
@GAP Getting aspect ratio
NJR-T04HD