IDK NJR-R04HD, Руководство пользователя

Страница: 85 / 94

NJR-T04HD / NJR-R04HD User’s Guide
85
10.11 Others
10.11.1 Devices to be connected
You can select devices to be connected.
If multiple NJR series products are connected via a network switch, you do not need to set this menu because
the NJR-CTB automatically set devices to be connected.
If “ 10.11.1 Devices to be connected ” is set to “NJR-T01UHD or NJR-R01UHD is included” and “ 10.5.7
Video type ” is set to “All Inputs”, the following settings of the NJR-T04HD will be initialized: “ 10.2.3 Aspect
ratio ”, “ 10.2.4 Overscan ”, ” 10.2.5 Display position ”, “ 10.2.6 Setting display size ”, and “ 10.2.7 Masking ”
If “ 10.11.1 Devices to be connected ” is set to “NJR-T01UHD or NJR-R01UHD is included”, the following
settings will be initialized: “ 10.3.1 Brightness ”, “ 10.3.2 Contrast ”, “ 10.3.3 HUE ”, “ 10.3.4 Saturation ”, “ 10.3.5
Sharpness ”, and “ 10.3.6 Gamma ”.
Setting value
Only NJR-T04HD and NJR-R04HD [Default]
NJR-T01UHD or NJR-R01UHD is included
Communication command
@SSY Setting devices to be connected
@GSY Getting devices to be connected
10.11.2 Initialization
You can initialize settings to factory defaults using IP-NINJAR Configurator or NJR-CTB via LAN
communication.
When initialization completes, the NJR reboots with new settings automatically.
Note:
Once values are initialized, they cannot be restored.
Communication command
@CLRC Initialization
【
See: 9.2 IP-NINJAR Configurator
】
【
See: 9.3 Control over NJR-CTB (Control box for IP-NINJAR)
】
NJR-T04HD / NJR-R04HD
NJR-T04HD / NJR-R04HD