MSD-501/502/701/702 User
’s Guide
108
Item
Description
Output Audio
Digital audio
MSD-501/502
MSD-701/702
1 output / 2 outputs × 2 distribution for each
Connector: MSD-501
HDMI Type A (19pin)
・
female × 1,
RJ-45 × 1
MSD-502
HDMI Type A (19pin)
・
female × 2,
RJ-45 × 2
1 output / 2 outputs ×2 distribution for each
Connector: MSD-701
HDMI Type A (19pin)
・
female × 1,
RJ-45 × 1
MSD-702
HDMI Type A (19pin)
・
female × 2,
RJ-45 × 2
Multi-channel linear PCM: up to 8 channels
Sampling frequency: 32 kHz to 192 kHz Sample size: 16 bit to 24 bit
Standard level: -20 dBFS Output level: up to 0 dBFS
Analog audio
MSD-501/502
MSD-701/702
1 output/2 outputs
Connector: RCA pin jack
1 output/2 outputs
Connector: RCA pin jack
Stereo L/R imbalance signal
Output impedance: 75
Ω
, Standard level: -10 dBu Output level: up to +10 dBu
Lip resync.
Up to 16 frames
Cable maximum extension distance
Digital input: Up to 32.8 ft. to 98.43 ft./10 m to 30 m (*5)
Digital output: HDMI / DVI up to 32.8 ft. to 164.04 ft./10 m to 50 m (*5) Digital signal for extension: up to
328.08 ft./100 m (*6)
Function-o
n
Analog video processing unit
3D Y/C separation
Scan converter
Aspect Ratio Control, Seamless Switching (*7), Picture adjustment (brightness, contrast, display position,
display size), Motion adaptive I/P conversion
Others
Volume adjustment (volume of input and output ports can be set separately)
Audio breakaway enables independent audio and video switching
Cross-point memory (storage for 7 settings )
Preset memory (8 settings and startup settings)
Last memory
Anti-Snow (*8)
Connection Reset (*9)
External control commands (32 commands)
Front panel security key lock
External
control
RS-232C
1 port: D-sub 9 pin connector
・
Male
LAN
1 port: RJ-45 connector 10Base-T/100Base-TX (Auto Negotiation), Auto MDI / MDI-X
External control
Outputting command from RS-232C,LAN, or digital signal output from extension to external devices
PJLink (class1),
Controlling power supply of sink device through CEC (*10)
Others
Power
AC to 100 V - 240 V
±
10%,50 Hz/60 Hz
±
3 Hz
Power consumption
(approx.)
MSD-501: 35 W
MSD-502: 43 W
MSD-701: 38 W
MSD-702: 48 W
Dimension
16.93 (W)
” x 1.73 (H)” x 11.81 (D)”/430 (W) x 44 (H) x 300 (D) mm (EIA rack 1U and projections are not
included)
Weight
MSD-501:4.2 kg
MSD-502:4.2 kg
MSD-701:4.3 kg
MSD-702:4.3 kg
Temperature
Operating temperature: 32 °F to 104 °F <0 °C to +40 °C>
Storage temperature: -4 °F to +176 °F <-20 °C to +80 °C>
Humidity
Operating/ Storage humidity: 20 % to 90 % (Non Condensing)
Supplied items
RS-232C cable (5.9 ft./1.8 m), Power supply cable (5.9 ft./1.8 m), rack mounting bracket
Cable clamp:
MSD-501: × 3
MSD-502: × 4
MSD-701: × 4
MSD-702: × 5
Option
1U rack mounting bracket (RM-OFS100)
(*1)
This product supports 30 bits/pixel Deep color (10 bit/component). It does not support xvYCC, Automatic Lip Sync, 3D, ARC, or HEC. (Lip sync can be adjusted manually.)
(*2)
Digital twisted pair output does not support DVI signal with HDCP. If you need to extend DVI signal with HDCP, please use the IDK
’s HDC-RD100 as a receiver.
(*3)
Digital twisted pair output is only for extending video, audio, power for a receiver, control signal using a Cat5e/Cat6 twisted pair cable. IDK receivers are required.
Please do not connect LAN devices to this connector.
(*4)
Wiring is straight T568A or T568B. If exceeding 164.04 ft./50 m, it is recommended to use a Cat6 cable.
(*5)
Transmission distance depends on connected devices. The information above is maximum transmission distance when a cable made by IDK (AWG24) is used and signal
(1080p 60 Hz 24bit/pixel (8bit/component)) are transmitted (both inputs and outputs of this product). When a connected device does not match to this product or other
manufacturers' cables are used, video signal can be unstable or cannot be output, even though the transmission distance is within the information above.
(*6)
Since some LCD monitors do not stabilize during operation, please check the operation before using or ask IDK for advices.
(*7)
Seamless Switching has one black frames or back color.
(*8)
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signal and mainly occurs at start-up. This feature does not work when
snow noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.