FDX-64 Users Guide
73
Fiber optic extension output board (*6)
Video
Number/Signal
4 outputs/Optical signal for extension
- HDMI (*7)/DVI 1.0
- HDCP 1.4
- TMDS clock: 25 MHz to 165 MHz
Connector
4 SFP modules (2 LC connectors per SFP module)
Formats
480i/480p/576i/576p/720p/1080i/1080p
VGA/SVGA/XGA/WXGA (1280x768)/WXGA (1280x800)/Quad-VGA/
SXGA/WXGA (1360x768)/WXGA (1366x768)/SXGA+/WXGA+/WXGA++/
UXGA/WSXGA+/WUXGA * WUXGA only supports DVI signal and output as Reduced Blanking
Audio
Number/Signal
4 outputs/Optical signals for extension
- Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample size: 16 bit to 24 bit
Connector
4 SFP modules (2 LC connectors per SFP module)
Fiber optic cable
Suitable cable
Duplex fiber cable, SFP module (2 LC connectors) (*8)
Polishing (*9)
SFP for Multimode: PC (recommended)
SFP for Singlemode: UPC (recommended), SPC supported * APC is not supported
Maximum distance (*10)
Multimode fiber (OM3): 985 ft. (approx.) <300 m>
Multimode fiber (OM4): 0.62 miles (approx.) <1 km>
Singlemode fiber (OS1): 2.9 miles (approx.) <4.7 km>
HDMI / DVI output board
Video
Number / Signal
4 outputs / HDMI Deep Color (*1) / DVI 1.0
- TMDS single link, TMDS clock: 25 MHz to 225 MHz
- HDCP 1.4 (*2)
- TMDS clock: 25 MHz to 225 MHz
Connector
4 female 29-pin DVI-I *Analog signals cannot be input
Formats
480i/480p/576i/576p/720p/1080i/1080p
VGA to QWXGA * WUXGA / QWXGA only support Reduced Blanking
Others
Digital cable EQ
Audio
Number / Signal
4 outputs / Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample size: 16 bit to 24 bit
Connector
4 female 29-pin DVI-I
Maximum distance (*11)
From 33 ft. (approx.) <10 m> up to 131 ft. (approx.) <40 m>
■
SFP specification
Item
Multimode fiber
Singlemode fiber
Connector
2 LC connectors (Duplex)
Wave length
850 nm (Oxide VCSEL Laser (*15))
1310 nm (Fabry-Perot laser (*15))
Maximum distance
OM3: 985 ft. (approx.) <300m>
OM4: 0.62 miles (approx.) <1km>
OS1: 2.92 miles (approx.) <4.7km>
Optical power level
Input
-13 dBm or more
-18 dBm or more
Output
-9 dBm to -2.5 dBm
-8.4 dBm to -3 dBm
(*1) The FDX supports 36 bits/pixel Deep color (12 bit/component) but does not support xvYCC, Lip Sync, 3D, ARC, HEC, and CEC.
(*2) Digital HDBaseT output does not support DVI signals with HDCP. If you need to extend DVI signals with HDCP, use IDK
’s HDC-RD100 as a receiver.
(*3) Digital HDBaseT output is only to extend video, audio, power for a receiver, control signals using a Cat5e/Cat6 HDBaseT cable. IDK
’s receivers are required.
