FDX-64 Users Guide
23
*
1
You can select whether channels of the FDX and optional Audio unit are switched in tandem with each
other from the following three modes using the SWITCHING MODE key.
● V&A mode: Turns orange; switching I/O channels of both the FDX and Audio unit together.
● VIDEO mode: Turns green; switching I/O channels of only the FDX.
● AUDIO mode: Turns red; switching I/O channels of only the Audio unit.
＜VIDEO
(only the FDX)
＞
＜AUDIO
(only Audio unit)
＞
＜V&A
(FDX and Audio unit)
＞
Every time you press the SWITCHING MODE key, the mode is switched as follows.
[Fig. 6.2] Selecting switching mode
*
2
You can select the output channel first instead of the input channel by pressing
the “OUTPUT” key.
*
3
Input channel numbers 0 to 9: If a channel that cannot input signals (a slot board is not mounted) is
selected, the selected value will be cleared.
The selected output channels can be OFF (no signal) by pressing the
“OFF” key (you can skip the “INPUT”
key).
The selected input channel can be output to all output channels by pressing the
“ALL” key (you can skip
the
“INPUT” key).
