FDX-64 Users Guide
3
All rights reserved.
Some of the contents in this User
’s Guide such as appearance diagrams, menu operations,
communication commands, and so on may differ depending on the version.
This User
’s Guide is subject to change without notice. You can download the latest version from IDK’s
website at: http://www.idk.co.jp/en/index.html
The reference manual for FDX-64 consists of the following two volumes:
■ User’s guide (this document):
Provides explanations and procedures for operations, installation, connections among devices, I/O
adjustment and settings.
■ Command guide:
Please download the command guide from the website above.
Provides explanations and procedures for external control using serial and LAN communications.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct the interference
at his own expense.
Note:
This equipment was tested with shielded cables on the peripheral devices. Shielded cables must be
used with the equipment to ensure compliance with FCC emissions limits.
CE MARKING
This equipment complies with the essential requirements of the relevant European health, safety and
environmental protection legislation.
WEEE MARKING
Waste Electrical and Electronic Equipment (WEEE), Directive 2011/65/EU
(This directive is only valid in the EU).
This equipment complies with the WEEE Directive (2011/65/EU) marking requirement.
The left marking indicates that you must not discard this electrical/electronic equipment in
domestic household waste.
If an HDBaseT input slot board (4 channels) or HDBaseT output slot board (4 channels) is equipped, use an
STP cable for the HDBaseT cable in order to meet the VCCI standard. It can reduce the noise caused by the
cable.
Before reading this manual
The lasers in this product meet Class 1 Laser Safety per FDA/CDRH and
EN (IEC) 60825 laser safety standards which
specify design safety.
クラス 1 レーザ製品
CLASS 1 LASER PRODUCT
