Idis ID391H Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 98

Idis ID391H Скачать руководство пользователя страница 85

Digital Video Recorder

77

⑮

Use the calendar to search for video recordings by specific dates. Dates containing video recordings are
highlighted in light blue. Selecting a date containing video recording data loads the earliest recording from that
date(paused state). Select date is highlighted in orange.

16

Select TimeLapse to enable time lapse search mode and search/play back video recordings in chronological order.

In Time Lapse Search mode, search is conducted by selecting days on the calendar. The time table at the bottom
displays recording data information for the selected date. Select a point in time to display video from that moment.
If multiple recordings are available for the selected point in time, you can select the desired segment.

17

Select Event to enable event search mode and search for events matching user-designated parameters.

18

Use the playback controls to play back video.

19

Click Goto to designate recent recordings you wish to search and then jump to a specific point in the recording.

20

Click Reload to reload recent video recordings from remote locales.

21

Indicates the selected camera’s recording data on a time bar. If the camera’s system clock has been changed to a

point in the past and more than one recording exists at the same point in time as a result, you will be able to choose
which segment to search from the segment menu on the upper right portion of the time table.

22

Selecting a camera from the screen and right-click to bring up the pop-up menu.



Change Camera Title:

Used to change the camera's name.

Enable Audi:

If audio was recorded with the video, enabling this option plays audio

upon playback (limited to single-screen playback).



Aspect Ratio:

Changes the image aspect ratio of the video displayed on the screen.



Anti-Aliasing Screen:

Removes stair step effect (blocks) that is caused when

zooming a video to improve overall quality of video output..

NOTE:

Renaming the camera in Web Search mode does not affect the camera's name on the remote system. If

no name is entered for the camera, the name used at the remote locale is shown on the screen.

«
...
83
84
85
86
87
...
»

Содержание ID391H



































































































Отзывы:

Нет отзывов