Idis ID391H Скачать руководство пользователя страница 74

Страница: 74 / 98

User’s Manual

NOTE:

Proper image display depends on the display settings of your PC. If you are experiencing display problems,

click the right mouse button on the background screen and select Properties

→

Settings then set the

Color quality

to “

32 bit

”. Then select Advanced

→

Troubleshoot, and then set the

Hardware Acceleration

to “

Full

”. Please

make sure that DirectX version 9.0 or higher has been installed if the display problem continues. To check the
version of DirectX, click Start

→

RUN and type “dxdiag” then hit the enter key which will display DirectX Diagnostic

Tool dialog box. Then move to the Display tab and make sure

DirectDraw Acceleration

is set to “

Enabled

”. Test

DirectDraw by selecting the

DirectDraw Test

button. Please check the driver version of the video card and

update it to the latest version available. If you still have display problems after changing all display settings as
described above, try replacing the video card. Video cards with an ATI chipset are recommended.



Playback Buttons:

Plays back the current video on the screen.

Goes to the beginning of the video clip.

Plays the video clip in fast reverse.

Goes back one frame of the video clip.

Plays the video clip.

Goes forward one frame of the video clip.

Plays the video clip in fast forward.

Goes to the end of the video clip.



Cycles through the screen modes. It cycles through 2x2, 1+7, 3x3, 4x4, 4x5, 5x5 and 1+32.

NOTE:

4x5, 5x5 and 1+32 screen modes might not be supported depending on the number of saved camera

channels.



Select from

Normal

and

Double

screen views (Single Screen Mode Only). You can move the enlarged image

by clicking the left mouse button and dragging.



Saves images.

−

Save as Image

: Saves the current image as a bitmap or JPEG file.

−

Save as Image (Actual Size)

: Saves the current video frame as a bitmap or JPEG

file in its actual size. (Single Screen Mode Only)

−

Save as Clip-Copy

: Saves video of desired time range as an executable file.

−

Save as Video

: Saves video of desired time range as an AVI file.

−

Clip-Copy Log

: Saves the clip copy log information as a text file. The user information

about Save As Clip Copy will be logged as “Internal-Copy.”

−

Save Frame Info

: Saves the frame information as a CSV file.

Содержание ID391H



































































































Результаты поиска

Содержание ID391H

Отзывы:

Idis ID391H, Руководство пользователя, Страница: 74 / 98

Результаты поиска

Содержание ID391H

Отзывы: